|
Displacement: 0.91 cu in (14.95 cc)
Bore: 1.09 in (27.7mm)
Stroke: 0.98 in (24.8mm)
Practical RPM: 2,000 - 16,000
Power Output: 3.4 hp @ 15,000 RPM
Weight: 1.4 lb (635g)
Height from crankcase bottom to top of cylinder head: 101mm (3.97")
Height/bottom of mounting tab to top of cylinder head: 80mm (3.10")
Distance between mounting holes same side: 24mm (0.94")
Distance between mounting holes opposite side: 51mm (2.00")
Distance between muffler screw holes: 41mm (1.61")
Distance/bottom of mounting tab to muffler screw holes:41mm (1.61")
Length from front of case to backplate: 81mm (3.18")
Length from backplate to end of crankshaft (w/pump): 128mm (5.03")
Width of crankcase below mounting tabs: 41mm (1.61")
Width between mounting tabs: 59mm (2.32")
Needle Settings: High Speed: 2 turns out from fully closed
Mid Range: 1/2 turn open
Mixture Control (low speed): indentation on screw
head straight up and down (vetrical)
|
